Forum

What are the main points of transport and placement of the T41 4 inches cutting disc December 06, 2018 1:52 AM

By : huimin

During the use of the T41 4 inches cutting disc size, not only should it pay attention to some of its precautions, but it is also an important task for the transportation and storage of the cutting disc. The T41 4-inch cutting disc can be transported or stored long distances as needed. Therefore, in order to ensure that it will not affect its use in the process, you need to pay attention to the following things:

1. Long-distance transportation should be properly packed with wooden boxes or wicker baskets, and the cutting pieces should be separated by soft materials such as straw and sawdust to prevent collision and impact.

Second, it should be stored in a dry place, room temperature is not less than 5 degrees Celsius, and the storage time should not exceed one year. Overdue cutting discs should be inspected before use. The modified cutting disc should also be used after re-spinning test.

Third, should be placed separately according to the specifications, the store is equipped with signs to avoid confusion and errors, the placement method should be based on the size of the grinding. Large or thick dicing blades shall be placed upright and slightly inclined. Thinner and smaller grinding wheels shall be placed flat, but not too high, and a flat iron plate shall be placed on each of them to prevent cutting plates. Deformed or broken.


To post a comment please register or sign in