Application of screw press fruit juice making machine March 26, 2021 3:02 AM
By : yang
Industrial double screw press fruit juice making machine is used to extract coconut milk from shredded coconut which is after the grinding process. Features: Designed with double helix press to make it continuously working; Avoid feed-throat clogging and there is no need to add water during the process. Industrial double screw press fruit juice making machine is mainly used to extract fruit and vegetable juices. The main component of the equipment is spiral, which increases gradually along the material residue outlet direction while the screw pitch reduces gradually. When the materials are pushed in by the spiral, due to the volume contraction of the spiral cavity, the materials are extracted. Application of screw press fruit juice making machine 1. Suitable for extracting juice from grapes, tomatoes, fruits, and vegetables. separating residues and juice. Also suit for cassava residue( Vietnam cassava residue), coffee extraction residue, wheat bran, soybean residue, corncob residue, corn residue, vegetable market food waste, kitchen waste, beer residue, wheatgrass, etc. 2. Industrial double screw press fruit juice making machine range of extracting ratio is very wide. The space between the screw stem and the cylinder can be adjusted according to different materials extracted. The operational principle of screw press fruit juice making machine Crusher: the material is formed in the high-speed rotating blades under the action of breaking. Industrial double screw press fruit juice making machine screw extractor: the main member is a screw, spiral slag outlet direction along with the bottom diameter increase gradually, and the pitch reduces gradually. When the material is spiral propulsion, as the reduce of spiral cavity volume, squeeze the material. The direction of rotation of the spiral shaft from the feed hopper to the slag groove direction is clockwise. The new material into the hopper, the spiral propulsion under compression, compressible juice can through filter screen to the juice holding device at the bottom, and the annular gap is formed between the conical part of waste through the screw and the discharge voltage, moving right adjust gap pressure head along the axial size. In clockwise: equipment from the slag notch to the feed hopper to rotate handwheel bearing seat, left pressure head, short the gap, otherwise the gap becomes large. Change the gap, as the adjust the slag resistance, it can change slag yield. But if the gap is too small, in strong extrusion, part of slag particles and juice together through the filtering net is extrusion, although the juice yield increase, but the quality of juice reduce, the size of the voids should require the user-specific process.